please write a small tutorial abt it alongwith download links of progs used
__________________
================================================== == Hafeez Centre Live! | Pakistan's biggest Mobile-Phone Trading Platform [Only registered and activated users can see links. ]
-----------------------------------------------------------------
[Musharraf Image from signature has been removed in interest of Pakistan]
restore/update to 1.1.2 (recommended from 1.1.1)
restore back to 1.1.1 ull get error at end of restore
use ibrickr 9 to boot iphone
run anysim 1.21u (installer repostory [Only registered and activated users can see links. ])
install oktoprep (installer tweaks 1.1.1)
you must see the oktoprep dialog box confirming install sucessfull
cz new oktoprep is crashing installer
update to 1.1.2 (not restore)
use java updated jailbreak
enjoy
please write a small tutorial abt it alongwith download links of progs used
****REMEMBER THIS IS FOR GOING FROM 1.1.1 TO 1.1.2 ONLY. NOT FOR 1.0.2 TO 1.1.2. ALTHOUGH I CAN ADD THIS IF SOMEONE WANTS****
Here is GUIDE. Its taken from modmyifone ([Only registered and activated users can see links. ]. Thanks to the original author ReVan for this guide. There are few things that I want to add though. I missed these things and I had a brick in my hand after this!! I had to revert back to 1.0.2 to start the process. I tried again and result came out with a 100% successful unlocked 1.1.2 iphone. read my instructions carefully and you should not have any problem upgrading your phone. This is piece of cake infact. Also I noted that there is no way to permenantly brick you iphone because it has DFU mode. if you somehow brick your iphone now or in future you can always enable this mode and restore to any firmware you want.
Instructions between <<< >>> are mine.
---------------------------- START-----------------------------------------------------
<<<UPDATE: YOU CAN USE THIS GUIDE BOTH ON XP AND VISTA. JUST DISABLE FIREWALLS>>>>
Tested and working on two phones Unlocked (anySIM 1.1, with previously virginized baseband) iPhone with 1.1.1 firmware and 04.01.13_G modem, bootloader 3.9_M3S2, iTunes 7.5, and Windows Vista.
Before we begin, download the following:
<<<use the original thread I posted above for download links>>>>
Phase 1 :: Checking your bootloader version
For those of you who have owned an iPhone prior to November 9th, then you can skip this step. If you don't otherwise know any better, you might want to verify what bootloader you have on your iPhone right now.
First you will need to have bbupdater installed in your /usr/bin folder. I will not provide this file. Google for it, or check the usual forums. Use the Terminal to login to the iPhone via SSH. Enter the following commands:
Your results better match those below as far as the bootloader is concerned. If they don't, then DO NOT proceed!
Quote:
Resetting target...
pinging the baseband...
issuing +xgendata...
firmware: DEV_ICE_MODEM_04.01.13_G
eep version: EEP_VERSION:207
eep revision: EEP_REVISION:8
bootloader: BOOTLOADER_VERSION:3.9_M3S2
When you are done checking, restart your iPhone.
Phase 2 :: Upgrade 1.1.1 to 1.1.2
1. Restore the iPhone to 1.1.2 firmware by putting the iPhone into DFU mode. Do this by pressing and holding the Home button, and the Sleep/Wake button.
2. As soon as the screen goes black, let go of the Sleep/Wake button. Continue holding the home button. Connect the iPhone to iTunes and you will get the pop up. The iPhone will display this graphic.
3. Click the SHIFT + Restore button or on a Mac (your keyboard key) and point it towards the 1.1.2 firmware you downloaded.
<<<<MAKE SURE THAT YOU CLICK "SHIFT + RESTORE" not SHIFT + UPDATE>>>>
4. Various messages will appear while the process continues.
5. The iPhone will restart, and iTunes will display this image.
6. The iPhone will display the new multi-lingual emergency slider and connect to iTunes graphic. You are now on 1.1.2 firmware with the new 04.02.13_G modem firmware.
Phase 3 :: Downgrade back to 1.1.1
* Downgrade to 1.1.1 firmware. You need to put the iPhone into DFU mode again. The restore should, go through and errors at the end with error 1015.
<<<<NO PROBELM IF THIS ERROR COMES>>>
However you will notice that the iphone is in DFU mode with the connect to itunes screen from 1.1.1.
<<<<YOU NEED TO KICK YOU IPHONE OUT OF DFU MODE MANUALLY. DO FOLLOWING FOR THIS. ALSO NOTE THAT NEXT TIME TILL YOUR IPHONE IS ON 1.1.2 AND FULLY UNLOCKED, YOU MAY GET THIS DFU SCREEN AGAIN AFTER REBOOTING. JUST KICK IT OUT AGAIN BY USING SAME COMMANDS. YOU WILL NOT GET THIS DFU AGAIN ONCE YOU HAVE FULLY UNLOCKED 1.1.2 IN YOUR HAND>>>>
* Download a working copy of iPhuc and issue the following commands:
cmd setenv auto-boot true
cmd saveenv
cmd fsboot
OR
Use iBrickr and click Boot from recovery - thanks judgejase for the tip!
Jailbreak by following the below method:
<<<<FOR JAILBREAK FOLLOW THIS INSTEAD [Only registered and activated users can see links. ]. BOTH ARE SAME BUT THE LINK I POSTED HAS DETAILED INSTRUCTIONS. COME BACK TO THIS GUIDE AFTER YOU JAILBREAK YOUR IPHONE AND SKIP BELOW STEP 1 TO 7. GO RIGHT TO "Unlock using anySIM1.2.1u" . LET ME KNOW IF YOU HAVE ANY PROBLEM IN JAIL BREAKING>>>>
1. On the Activation Screen, slide the Emergency Screen.
2. Type *#307# and hit Call, the phone will start ringing and display 1 Calling.
3. Delete all the numbers from the top right of the screen and Call the number 0.
4. Press Answer, Hold and then Decline.
5. Go to Contacts and create a contact. In the Url field type prefs://1f and save it. Then add another URL and type jailbreakme.com and save it.
6. Click on the prefs://1f and you can select your WiFi network. Exit by pressing home and then Dial and Call the number 0 from the emergency screen.
7. Select the second URL called jailbreakme.com of the contact you created and and follow the Install AppSnapp. Wait for it to finish and reboot the phone when its done.
Unlock using anySIM1.2.1u
1. Run Installer and install BSD Subsystem & OpenSSH
2. Extract the anySIM.app folder from anySIM1.2.1u.zip onto a folder.
3. Download WinSCP
4. Check the IP issued by your WiFi for your phone, it should something like 192.168.xx.xx
5. Run WinSCP and enter the IP as asked above, and put the username: root & password: alpine
6. Wait for 30-35 secs and you will be asked to add a host key (big dialog box) say Yes
7. After login into your phone, goto root -> Applications and copy the anySIM.app folder there and chmod all the files inside the anySIM.app folder to 0755 (by selecting all files and click on Properties)
8. PowerOff your phone and put the original AT&T SIM
9. PowerOn & now you will find the anySIM icon on your SpringBoard. Goto Settings > General > Auto-lock change it to Never.
10. Run anySIM
11. After it shows the "Successfully unlocked message".
12. Prepare your 1.1.1 device for the Update
(I). Launch Installer.app
(II). Scroll down to Tweaks (1.1.1)
(III). Select OktoPrep
(IV). Click Install
Phase 4 :: Upgrade to 1.1.2 - Thanks callx
What you'll need:
<<<<<<STOP HERE !!!!!!!!!!!!!!!!!!!! READ BELOW INSTRUCTIONS VERY CAREFULLY. IT SAYS SHIFT + UPDATE NOT SHIFT + RESTORE AS IN PREVIOUS STEPS. I WILL SAY IT AGAIN. CLICK SHIFT + UPDATE BUTTON NOT SHIFT + RESTORE BUTTON>>>>>>>
2. Do either Download & Install or press SHIFT + Update button and point it to the v1.1.2 firmware you downloaded manually.
3. Jailbreak 1.1.2
- So, right now you should have a nice 1.1.2 activate screen talking in tongues. As a rule of thumb, just open iTunes and let it detect the iPhone then close it.
- Now run windows.bat from the 1.1.2 jailbreak and check option Install ssh, change password if needed and click Jailbreak
- Might take like 5-10 mins, more coffee maybe?
<<<<<I DID NOT PERFORM FOLLOWING INSTRUCITONS. NO NEED FOR PAKISTAN I THINK. I HAD WARIDTEL WRITTEN ON TOP LEFT CORNER ALREADY. JUMP STRAIGHT TO (*******) INSTRUCTIONS BELOW>>>
Carrier settings *optional* (For those who wanna sexy up that iphone )
- Winscp to your phone and put ls and bash in /bin
- Click on "more", set both permissions to 0755
- Check here for your carrier's MCC and MNC (it's not as hard as it sounds)
e.g MCC = 334 MNC = 02, the number we'll need is 33402
- Open the Telcel.plist in UltraEdit or wordpad and modify accordingly (Don't forget to rename your .plist file & change the supported sim section)
- Use winscp to put the modified .plist to /System/Library/Frameworks/CoreTelephony.framework/Support/
- Open putty and connect to your phone
- Type bash at the prompt
- Type cd /System/Library/Frameworks/CoreTelephony.framework/Support
- Type ln -s NUMBER YOURCARRIER.plist
e.g ln -s 33402 Telcel.plist
- Remove your sim and put some other sim in it to reset the carrier settings(maybe that unactivated att simcard lying around? )
- Remove the sim card and put back in yours after the phone detected it
- You should be set, no reboot needed
(*******) Fix for crashing phone/sms *optional* <<<DO THIS>>>
- In Installer, look under Tweaks v1.1.2
- Install iWorld select your country from the list and its done :-)
<<<<<ACTIVATE YOUTUBE ADD THIS ([Only registered and activated users can see links. ]) SOURCE IN YOUR INSTALLER. CLICK REFRESH. RUN YOUTUBE ACTIVATION SOFTWARE THAT WILL APPEAR IN YOU INSTALLER >>>>>>
Nice guide, but most of us have 1.02. Can you explain how to go from that to the latest fw? Thanks.
FOR THOSE WHO WANTS TO UPGRADE FROM 1.0.2 to 1.1.1 to 1.1.2
STEP 1: Upgrade from 1.0.2 to 1.1.1
Use this [Only registered and activated users can see links. ] guide step by step. This will lead you through. You may face only one issue thats is, when you try to unlock as a last step, you may not find anysim using installer.app. Use this guide at that moment [Only registered and activated users can see links. ] and *ONLY* follow the steps number 4 & 5.
STEP 2:
After Step 1, you will have 1.1.1 iPhone fully unlocked and working. You can continue using 1.1.1 or if you wish, you can then upgrade to 1.1.2 using the guide posted above.
Linear Mode
